A plain-English map of who needs a licence to install, maintain, sell or advise on alarms, CCTV or access control in Australia. It is written NSW-first (the worked example in sections 1–10), then covers every other state and territory in section 11, with mutual recognition in section 12. It is for technicians, businesses, and homeowners who are hiring someone to do that work. It is a companion to the existing thread on Australian electrical compliance for smart-home work. It is not legal advice, not a substitute for a licence, and not a complete statement of the law. If a fact matters for a real job or a quote, read the current official regulator and legislation pages for that jurisdiction, or get advice from the regulator or a lawyer. Do not assume a NSW class, exemption or register applies outside NSW.
Complexity
Reading: beginner. Doing paid security work in NSW is licensed work.
1. This is a different licence from an electrician's licence
The Security Industry Act 1997 (NSW) and the current Security Industry Regulation 2026 are administered by the Security Licensing & Enforcement Directorate (SLED) of the NSW Police Force. Applications are made through Service NSW.
That regime is separate from:
- an electrical contractor or electrician's licence — required for electrical wiring work in NSW, with a Certificate of Compliance for Electrical Work (CCEW) when that work is done
- ACMA cabling registration — required for customer cabling work regulated under the Telecommunications (Cabling Provider) Rules 2025, including communications cabling in the security and alarm industry when it is customer cabling of that kind
2. What the Act treats as a "security activity"
Under section 4 of the Act, a person carries on a "security activity" if they do any of the listed activities in the course of conducting a business or in the course of the person's employment. For the work this forum usually discusses, that list includes:
- installing, maintaining, repairing or servicing security equipment — or other equipment that the person purports to be designed or adapted to provide or enhance security, or to protect property
- selling security equipment (the Act carves out "basic household or automotive security items" sold at approved classes of retail outlets; the detail sits in the Regulation — check the current official text rather than guessing what counts)
- acting as a security consultant, and selling security methods or principles
- patrolling, protecting or guarding property by electronic means, including monitoring-centre operations and control-room operations
3. Which licence covers which job
There are three licence families: a Class 2 licence (specialist / "security operative" work), a Class 1 licence (mainly guarding and monitoring), and a master licence for the business that provides those people. You can hold more than one subclass on the same operative licence. The summaries below follow SLED's public class pages and the authorities in sections 11 and 12 of the Act. Always check the current official wording.
Class 2 — the usual classes for alarms, CCTV and access control
- Class 2C Security Equipment Specialist — sell, install, maintain, repair, service and provide advice in relation to security equipment. SLED expressly includes CCTV cameras, alarm systems and barrier equipment, and says you can also work as a locksmith. This is the usual licence for a technician doing the install or service work discussed in this thread.
- Class 2B Security Seller — sell security equipment and provide advice on its use; receive payment for referring a client to another licensed operator; negotiate or obtain contracts to supply security equipment or security operatives; or be paid to negotiate contracts on someone else's behalf. A 2B licence does not authorise you to install, maintain or repair security equipment.
- Class 2A Security Consultant — work as a security adviser or consultant, identifying and analysing security risks and selling solutions and strategies to minimise those risks.
- Class 2D Security Trainer — provide training, assessment or instruction in relation to a security activity. SLED notes that this does not include training, assessment or instruction in the use of firearms.
- Class 2E Private Investigator exists as a fifth subclass. It is not the licence for installing or selling alarm, CCTV or access-control equipment, and is not covered further here.
- Class 1E Monitoring Centre Operator — authorises the holder to patrol, protect or guard property while carrying on monitoring-centre operations. SLED describes a monitoring centre, in this context, as a facility of the kind defined by AS 2201.2 that monitors domestic and commercial alarm systems. Operators may only physically attend or respond to activations if they also hold a Class 1A licence.
- An on-site control room for a particular site (for example a shopping centre or office complex) is treated differently: SLED says a control-room operator must hold a Class 1A Security Officer licence, and cannot carry on monitoring-centre operations unless they also hold Class 1E.
A master licence authorises the holder to provide licensed Class 1 or Class 2 operatives to carry on security activities in NSW. "Provide" includes employing or subcontracting people, and also arranging them indirectly (for example by contract or franchise). SLED says you need a master licence if you want to own and operate a security business, if you already hold a Class 1 or Class 2 licence and want to carry on security activities yourself in your own business, or if you employ operatives to carry on security activities.
Master licence subclasses limit how many licensed people you may provide on any one day:
- MA — self-employed individual only. You must also hold the appropriate Class 1 and/or Class 2 licence. You cannot provide any other operative besides yourself.
- MB — no more than 3 operatives
- MC — no more than 14 operatives
- MD — no more than 49 operatives
- ME — an unlimited number of operatives
4. Training and competency
SLED's Class 2 training page and Service NSW's application page are the places to check before you enrol in a course. In summary, as those pages stood when this was researched:
- Class 2C and 2B — you do not have to give SLED evidence of formal training. You are still expected to have the skills and relevant qualifications to do the work safely and in line with other industry guidelines. Service NSW also states that an applicant must be competent to carry on the activities of the licence sought.
- Class 2A — at least five years of relevant security-industry experience (SLED sets out how that experience can be shown, including a continuity rule), plus CPP41519 Certificate IV in Security Risk Analysis with the units SLED lists on its training page.
- Class 2D — at least three years of relevant experience, plus a current accepted training-and-assessment qualification (SLED currently lists TAE40122 or specified predecessors / a diploma or higher in adult education).
- Class 1 (guarding and related work) — applicants, except those applying for Class 1E, must complete the NSW Security Licence Course through a SLED-approved organisation, plus the first-aid and unit requirements on SLED's Class 1 training page. This thread does not try to restate the 1E pathway beyond that published exception; read the current SLED page if you are applying for monitoring work.
- Master licence — SLED's FAQ states that you do not need any training to apply. The nominated person or individual applicant must still meet eligibility and probity requirements, including fingerprinting.
5. Fit-and-proper and probity checks
SLED will not grant a Class 1 or Class 2 licence unless you meet the published eligibility rules. In outline:
- you must be at least 18, and an Australian or New Zealand citizen, a permanent resident, or the holder of a visa type SLED will accept (a visa sponsored by a master-licence holder, or a visa for a skilled occupation that corresponds to the subclass)
- SLED takes fingerprints and palmprints and runs a probity assessment (SLED says this typically takes four to six weeks after fingerprinting)
- you are not eligible if, in the periods SLED publishes, you have a prescribed criminal offence, a relevant finding of guilt with no conviction recorded, registrable-person reporting obligations under the Child Protection (Offenders Registration) Act 2000, a civil penalty, or you have been removed or dismissed from a police force
- SLED may also refuse an application if you provide false or misleading information, omit required documents, are linked to criminal activity or investigations, granting the licence would not be in the public interest, or you are not considered a fit and proper person to hold a security licence
6. What a DIY homeowner may do on their own property
This needs to be stated carefully, because it is not a loophole for paid work.
The Act's definition of a "security activity" is limited to things done in the course of conducting a business or in the course of the person's employment. On that wording, a homeowner who is only working on their own property, and is not doing it as a business or as an employee, is generally outside the licensing net. SLED's public pages do not spell out a separate "homeowner DIY" exemption in those words, so if your situation is unusual, check with SLED before you rely on this.
What it does not cover:
- installing, maintaining or advising on alarms, CCTV, access control or security barriers for other people, including friends, neighbours, or "mates rates" work, if that is business or employment
- holding yourself out as a security installer, or quoting for that work, without the right licences
- electrical wiring work — that still has to be done by, or under the supervision of, a licensed electrician, with a CCEW
- customer cabling work that sits under the ACMA cabling rules — that still needs a registered cabler (or direct supervision by one)
- people in building, construction or home maintenance who install, or engage others to install, basic security equipment like locks as part of that work. SLED says this does not include locksmiths, or people selling, repairing, maintaining or providing customised advice on other security equipment such as CCTV cameras and security fencing
- handymen who install basic security equipment like locks in the course of providing home-maintenance services. SLED says this does not include tradespeople who are specifically contracted or hired to install, repair or maintain security equipment
- employees of a non-security business who install, maintain, repair or service internal security equipment for their employer's own business (including a related body corporate). That exemption does not cover doing the same work for other businesses
7. How electrical licensing and ACMA cabling sit beside a SLED licence
Think of three questions on the same job:
- Is it a security activity in a business or employment? If yes, the person doing it generally needs the right Class 2 (or Class 1, for monitoring) licence, and the business needs a master licence.
- Is it electrical wiring work? NSW guidance is that electrical wiring work must be done by, or under the supervision of, a licensed electrician. The electrician must submit a CCEW. From 1 July 2026, CCEWs are lodged through the Building Commission NSW eCert portal. Check an electrician's licence through Service NSW or verify.licence.nsw.gov.au. See also the electrical compliance thread.
- Is it customer cabling under the ACMA rules? The Cabling Provider Rules require a registered cabler to perform telecommunications, fire, security and data-industry communications cabling of the kind those rules cover. Work must comply with AS/CA S009, and the cabler must give the customer a written compliance statement. An Open registration, with the specialised competencies that match the cable type (ACMA's examples include cabling that connects security and alarm devices), is the usual path for broader premises work. Restricted registration is narrower. This is not a claim that every extra-low-voltage lead on a site is ACMA work — if you are unsure whether a particular run is customer cabling, ask a registered cabler or check the current ACMA rules.
SLED keeps a public register of NSW security operative and master licences. You can search by name or licence number (and, on the Service NSW checks, also by ABN or ACN):
- SLED's starting page: Verify a Security Licence
- the public register itself: verify.licence.nsw.gov.au/home/Security
- Check a security operative licence (Service NSW)
- Check a security master licence (Service NSW)
Interstate or New Zealand licence holders who want to work in NSW should use Service NSW's Mutual Recognition information rather than assuming their home licence is enough on its own.
9. Penalties, at a high level
Carrying on a security activity without the right licence is a criminal offence. Section 7 of the Act, as it appeared in the current official view when this was researched, sets these maximum penalties:
- carrying on a security activity without the Class 1 or Class 2 licence that authorises it (s 7(2)) — 500 penalty units, or imprisonment for 2 years, or both
- providing people to carry on security activities without a master licence, or providing more people than the master licence allows (s 7(1)) — 1,000 penalty units for a corporation; for an individual, 500 penalty units or imprisonment for 2 years, or both
10. A checklist if you are hiring an installer
- Ask for the individual technician's security licence number and check it on the public register. For alarm, CCTV or access-control install, maintenance or repair, you are usually looking for a current Class 2C.
- Ask for the business's master licence number (and ABN) and check that too. A sole trader should have both a master licence (often MA) and the right operative licence.
- If the quote includes back-to-base or monitoring-centre monitoring, that is a different licence family (the monitoring business needs a master licence; operators need Class 1E, and Class 1A as well if they will attend in person).
- If the job includes 230/240 V work, fixed electrical wiring, a new circuit, or similar electrical wiring work, check the electrician's licence and ask for the CCEW for the work they do.
- If the job includes customer cabling of the kind the ACMA rules cover, ask whether the cabler is ACMA-registered for that work, and ask for the cabling compliance statement at the end.
- Do not assume that an electrician's licence, a cabling registration, or a general handyman arrangement is enough on its own.
- Have the licence numbers put on the quote and the invoice.
- If the property is not in NSW, stop and use that state or territory's scheme. This map is NSW only.
Security licensing is not national. Each state and territory has its own Act, regulator, licence names and (sometimes) a public register. The summaries below cover only what official regulator or legislation pages said, when this was researched, about installing, maintaining, selling or advising on alarms, CCTV and access control. Where a jurisdiction does not publish an equipment-installer class, that is stated — it is not a claim that no other law can apply. Check the local official page before you quote, advertise or start work.
The ACMA Cabling Provider Rules are national: customer cabling of the kind those rules cover (including security and alarm communications cabling) still needs a registered cabler, anywhere in Australia. Electrical licensing remains state and territory based. A security licence is not an electrical licence. For electrical wiring work, use a licensed electrician in that jurisdiction and ask for the local compliance certificate. ERAC's licensing page is a sensible first bookmark for the electrical regulators, and the electrical compliance thread maps the idea.
Comparison, in one list
- NSW — SLED. Typically Class 2C to install, maintain, repair, service or advise, Class 2B to sell (not install), Class 2A to consult, plus a master licence for the business. See sections 1–10.
- Victoria — Victoria Police Licensing and Regulation Division, Private Security Act 2004. Since 19 June 2025 there are no Class A or Class B activities. Install, maintain or repair work is the licensed activity of security equipment installer; advice is security adviser. The person needs a Private Security Individual Operator licence endorsed for the activity; a business (including, from 19 December 2025, an independent contractor with an ABN related to the activity) also needs a Private Security Business licence.
- Queensland — Office of Fair Trading, Security Providers Act 1993. A Class 2 security equipment installer licence authorises install, repair, service or maintain work (OFT lists alarms, monitoring systems, audio/visual recording, access-control devices, detectors, safes/vaults and locks). Advising for reward needs a Class 2 security adviser licence. A business that supplies those people generally needs a Class 2 security firm licence (a sole trader who does all the work themselves does not, on OFT's published rule).
- Western Australia — WA Police Force Licensing Services, Security and Related Activities (Control) Act 1996. Alarms and CCTV for security purposes sit in Security Installer Class 2 (install, maintain or repair) and Security Consultant Class 2 (advice). Self-employed or subcontracting installers or consultants working under their own ABN also need a Security Agent licence. Other installer/consultant classes exist for safes/locks and security doors; those are not unpacked here.
- South Australia — Consumer and Business Services, Security and Investigation Industry Act 1995. Official SA pages say a security agent's licence is required for installing and maintaining security systems, and for security systems sales and advice. CBS's licence-categories guide calls this Security agent – security systems work (or the employee version). A narrower category, security systems work limited to providing sales and advice only, covers advice and supply, not installing or maintaining. An employee-only licence does not authorise running a business or subcontracting.
- Tasmania — Consumer, Building and Occupational Services / Consumer Affairs and Fair Trading, Security and Investigations Agents Act 2002. The Act licences "security activities" that it defines as patrolling, protecting, watching or guarding property (including by electronic means), screening, acting as a bodyguard, and training in those activities, when done for consideration in a business or employment. Official pages also licence crowd-control and inquiry work. They do not describe a licence class for installing, maintaining, selling or advising on alarms, CCTV or access-control equipment. Electrical and ACMA rules still apply.
- Australian Capital Territory — Access Canberra, Security Industry Act 2003. A security employee licence is issued with subclasses. For this topic, official subclasses are 2A (security consultant), 2B (sell security equipment), 2C (surveys and inspections of security equipment), 2D (give advice about security equipment) and 2E (install, maintain, monitor, repair or service security equipment). A business that employs or provides people to perform security activities needs a security master licence, which on its own does not let the holder personally perform those activities.
- Northern Territory — Licensing NT, Private Security Act 1995. Official NT pages licence security officers, crowd controllers and security firms that supply those services (patrolling or guarding another person's property, or crowd-control work at listed venues). They do not describe a licence class for installing, maintaining, selling or advising on alarms, CCTV or access control. Electrical and ACMA rules still apply.
Regulator: Victoria Police, Licensing and Regulation Division. From 19 June 2025, former private security registrations had to transition to licences; Victoria Police says all private security activities are now licensed activities, and there are no longer Class A or Class B activities. Security equipment installer is described as covering CCTV, security cameras, security alarms, safes, vaults and similar. Victoria Police currently states there are no training requirements for an individual licence as a security equipment installer and/or security adviser (other activities do have training rules). Official DIY wording: you do not need a private security licence to install a security system at your own property, but anyone who assists with the installation must be appropriately licensed. Check a person or business on the Register of Licence, Registration and Permit Holders (search by name or licence number; suspended, cancelled or expired licences without a pending renewal do not appear). Victoria also has client risk-management-plan rules in the Act; templates published so far are for some guarding and crowd-control activities, so confirm with LRD how those rules apply to a particular install.
Queensland
Regulator: Office of Fair Trading. The Act defines a security equipment installer as a person who, for reward, installs, repairs, services or maintains security equipment, and a security adviser as a person who, for reward, gives advice about security equipment or security methods or principles. OFT states you do not need training to hold either Class 2 licence, but fingerprinting and suitability checks apply. The Act (current official view as at 29 October 2026) also says a person is not a security equipment installer merely because they install a basic security item in a building they own or occupy, or install a basic security item in someone else's building during its construction, repair or renovation. "Basic security item" is defined narrowly (for example a portable safe up to 50 kg, a barrier item such as a mesh door or window grille, a basic household lock, or a motion-sensor light that does not also activate an alarm). That is not a general exemption for paid alarm or CCTV work. Employees doing only their employer's own equipment are also carved out in the Act. Check licences on OFT's public register (the search tool is the Fair Trading Licensing Register).
Western Australia
Regulator: WA Police Force, Licensing Services (Security). For alarms and CCTV for security purposes, official pages point to Security Installer Class 2 and Security Consultant Class 2, each requiring an approved Technical Security training course before you apply (WA Police has also published rules about approved RTOs). A Security Agent licence is required to advertise or supply those services, or to employ those licence holders, and also if you are self-employed or subcontracting under your own ABN. An agent licence does not by itself let you do the installer or consultant work. The installer licence does not apply to security equipment in vehicles, vessels or aircraft. Official DIY guidance for a homeowner installing on their own property was not found on the pages fetched for this update, so it is not stated here — ask Licensing Services if that is your situation. Current holders are published as downloadable lists on Security licence: current licence holders.
South Australia
Regulator: Consumer and Business Services. Use the category that matches the work: full security systems work if you will install or maintain, or the sales and advice only restriction if you will not. CBS's official categories guide also notes a limited exemption from a licence to hire out or supply systems if the person does not attend the premises where the system is supplied; that is not a general install exemption, and CBS points to other exemptions in section 4 of the Act. No official CBS or SA.gov.au page fetched for this update was found that spells out a homeowner DIY rule, so that is not stated here. Check a person or company on the CBS licensing register.
Tasmania
Regulator: Consumer, Building and Occupational Services (Consumer Affairs and Fair Trading). Agent and employee licences authorise the activities printed on the licence (official mutual-recognition material discusses Security Guarding General, including monitoring-room operator, and related endorsements). Because the Act's definition of "security activities" is about guarding, watching and similar work — not equipment installation — do not treat a Tasmanian security agent licence as the authorisation to install alarms or CCTV, and do not assume an installer class exists unless CBOS says so. Search licensed security agents via Search licensed occupations.
Australian Capital Territory
Regulator: Access Canberra. For install or service work, look for employee subclass 2E; for sell or advice work, look for 2B, 2A or 2D as appropriate; and check the business's master licence as well. Access Canberra also issues trainer, temporary (supervised trainee) and special-event temporary visitor licences. Official DIY wording for a homeowner installing on their own property was not found on the Access Canberra page fetched for this update, so it is not stated here. Verify licences on Access Canberra's public registers (Security employee, Security master, Security trainer, Security temporary). From 11 May 2026, employee licences are moving to 11-digit numbers; Access Canberra says both numbers appear on the register until the new card is issued.
Northern Territory
Regulator: Licensing NT. Use these licences for officers, crowd controllers and firms that supply them — not as a substitute equipment-installer licence. Official DIY wording for equipment install was not needed for a class that the official pages do not describe; electrical and ACMA rules still apply to the work itself. Licensing NT maintains a public register of licences.
12. Working across state borders
There are two official national pathways, both under the Mutual Recognition Act 1992 (Cth). Neither replaces the need to check the destination regulator before you start work, and Automatic Mutual Recognition (AMR) (automatic deemed registration) does not apply to every occupation or every jurisdiction.
- Mutual recognition (standard) — you apply to the local regulator for the equivalent local licence, prove your home licence, and usually pay a fee. DEWR describes this as the basic national framework.
- Automatic Mutual Recognition — if it applies, an individual who holds a current home-state licence can be taken to be registered for the same activities in a second jurisdiction without a second application or fee, but must still obey local laws and any notification rules. DEWR states that AMR is available in all states and territories except Queensland, which is not currently participating, and that states can exempt occupations.
- NSW — SLED states that the Australian Government AMR / JobPass scheme will not apply to people wishing to work in security roles in NSW. SLED obtained a five-year exemption effective from 1 July 2022. Interstate individuals can still apply under the standard mutual recognition scheme (SLED's P608 form). Corporations cannot be mutually recognised. If you own a security business in another state or territory and provide services to NSW clients, SLED says you need a NSW master licence, and the operatives you provide also need NSW licences. New Zealand holders can apply under Trans-Tasman mutual recognition.
- Queensland — not in the AMR scheme. OFT says you can transfer an interstate or New Zealand licence by mutual recognition (Class 2 for a security adviser or equipment installer). Only individuals can use mutual recognition, not security firms. You may continue to work while the transfer is processed, on the conditions OFT lists. Short-term temporary interstate permits may also be available, including to firms — call OFT for that pathway.
- Western Australia — WA Police states that all security industry licences issued under the Act are excluded from AMR (announcement of July 2022, still published on the official updates page). Existing mutual recognition remains available; WA Police says qualifying applications lodged at the Cannington office can be issued the same day, and the interstate licence must still be valid for at least one month from the lodgement date.
- South Australia — CBS publishes an official AMR fact sheet for security and investigation agents. If your principal place of residence is outside SA, you may be able to work in SA under AMR on an equivalent home licence (including security systems work, or sales and advice only, if that is what your home licence covers). AMR applies to individuals, not companies. If your principal residence changes to SA, you must hold an SA licence (you can apply under standard mutual recognition). Licences granted under mutual recognition, including via AMR, are said to appear on the SA register.
- Australian Capital Territory — Access Canberra says that if you are a licensed security worker in another state or territory, you may be eligible to work in the ACT under AMR, and also describes a standard mutual-recognition application path (including a statutory declaration and a fingerprint-verified police check). Confirm the current notification rules with Access Canberra before you start.
- Northern Territory — official AMR pages list security officer and/or crowd controller as a recognised category for interstate holders working in the NT. That list does not create an equipment-installer licence.
- Victoria and Tasmania — standard mutual recognition exists (Victoria Police notes Mutual Recognition Act applications on its register page; CBOS has a mutual recognition page for employee and individual-agent licences, and says you cannot work in the Tasmanian security industry until you have a current Tasmanian licence card). Whether AMR currently covers a particular security-equipment activity in Victoria or Tasmania should be confirmed with the local regulator; this thread does not assume that it does.
Official starting points
SLED security licences
SLED Class 2 licences
SLED Class 2 training
SLED Class 1 licences
SLED master licences
SLED security licence exemptions
SLED frequently asked questions
SLED: verify a security licence
Public register of security licences
Service NSW: apply for a security operative licence
Service NSW: apply for a security master licence
Security Industry Act 1997 (NSW) — current official view
Security Industry Regulation 2026 — current official view
Victoria Police: private security
Victoria Police: changes from 19 June 2025
Victoria Police: public register
QLD OFT: security equipment installer licence
QLD OFT: check a security licence
Security Providers Act 1993 (Qld) — current official PDF
WA Police: types of security licences
WA Police: current licence holders
SA.gov.au: apply for an employee security agent licence
CBS SA: licence categories guide (PDF)
CBS SA: find a licence holder
Tasmania CBOS: security and investigation agent licences
Security and Investigations Agents Act 2002 (Tas) — current official view
Access Canberra: security industry licences
Access Canberra: public registers
NT.GOV.AU: security licences
DEWR: mutual recognition and AMR
SLED: mutual recognition scheme
NSW electrical compliance requirements (CCEW)
ACMA cabling provider rules
Just Smart Homes: electrical compliance thread (t=239)
This is not legal advice. Licensing rules, fees, training lists, exemptions and mutual-recognition settings change; check current official guidance and the in-force legislation for the state or territory where the work will be done before you rely on any point in this thread. Researched from official documentation on 22 November 2026 (Australia/Sydney). Please correct anything that has moved on.