A coherent control path
A Revolution DR2PA physical wall panel sends a DyNet command → a DDRC420FR switches one output → an ordinary downlight turns on. The controller also supplies the small DyNet network. A DALI gateway is not required when the load is being switched by a relay; a touchscreen or app server is not required to make the button work.
What the minimum quote should include
- Dynalite DR2PA wall panel through Control Co — specify at least one populated working button, fascia, correct wallbox and mounting accessories, not only a bare trim. The model supports configurable button functions; button count and finish affect the order. AUD: quote required; USD: no defensible public equivalent until quoted.
- Dynalite DDRC420FR four-channel relay controller — four feed-through switched outputs, not dimming. The current manufacturer specification lists 100–240 V AC input and 200 mA DyNet DC output. This avoids budgeting a redundant external supply for a tiny network, provided the commissioner's actual device-current calculation fits. AUD/USD: quote required.
- SAL Wave S9065TCWH complete LED downlight — AUD 10.60 / USD 7.31, Australian retail including GST. Includes its ordinary LED driver, flex and plug; a compliant ceiling socket/connection and installation are still needed. This is not a DALI driver or a smart lamp.
- Correct DIN enclosure/distribution-board space, protection, panel backbox, terminals, mains supply and safe lamp connection. Include the proper DyNet cable and any termination/commissioning accessories required by the actual design. AUD/USD: site-specific quote.
- Commissioning using System Builder, a suitable Windows PC and a supported DyNet PC interface. The current PD-PCN USB-C PC Node is a real commissioning tool, supplied with USB-C cable and UI commissioning adapter. Have the installer either include its purchase or explicitly provide it as their reusable service tool. AUD/USD: quote the hardware or commissioning service, not both accidentally.
Automated lists the exact DDRC420FR with “Add to Quote”. Its live page did not display a price, even though a search snippet showed an older figure. That snippet is not used here. Control Co is another identifiable supplier channel, not a claim that all configurations are in stock.
Only the ordinary light currently has a checked public price: AUD 10.60 / USD 7.31. That is emphatically not the cost of a working Dynalite setup. Obtain prices for the other lines and then total them. This is more useful than assigning a fictional price range to a panel or omitting commissioning to make the number look small. Ask whether GST is included, whether the panel is complete, and whether programming, testing and the final project backup are separate charges.
Additional price-source check
Control Co’s current Australian DDRC420FR V2 product listing was checked in addition to Automated; it uses a request-pricing catalogue rather than giving a usable public component price. Smart LED and Lighting Controls in the UK lists the current PD-PCN but its fetched page likewise gives no price. These are additional supply channels, not support for reviving an old search-snippet number. The substantial hardware remains quote-only in both AUD and USD; the ordinary luminaire is the only priced line.
Wiring and implementation effort
DyNet is a wired RS485 control network, not an Ethernet LAN. The Dynalite technical overview and DR2PA specification cover the network and panel connections. Budget manufacturer-approved twisted-pair data/power cable and the controller-to-light mains wiring. Follow the actual controller/panel installation instructions for topology, shielding, power distribution and termination; an RJ connector is not permission to use an Ethernet switch.
Electrical work requires a licensed electrician, and programming requires Dynalite-specific skills: assign panel functions and areas/channels/scenes, configure outputs and test the saved project. This is high complexity compared with a consumer smart bulb, but routine work for a trained integrator. Confirm software access, version support, any licence charges and service fees in the quote rather than assuming the end user automatically receives installer tools.
Reusable versus per-light costs
The panel, supply capacity and commissioning interface are infrastructure; three relay channels remain for other appropriately rated circuits. Additional lights still need load/inrush checks, mains wiring and programming. Dimming requires a different suitable output controller or DALI design. Ethernet/app/remote-access gateways are optional additions here, not compulsory components of this basic switch-to-relay path.
Literal wiring types for the cost plan
Control: approved DyNet RS485 twisted-pair data cable with the specified power conductors (screened Cat5e only where the exact Dynalite installation manual permits); load: mains-rated cable; commissioning: USB-C to PD-PCN.
Price basis and safety
Prices were checked on 8 November 2026 (Australia/Sydney), not obtained as quotations. Currency equivalents use the RBA rates for 6 November 2026: AUD 1 = USD 0.6900 = EUR 0.6161. Converted figures are not US/Australian retail offers or landed import prices. Tax treatment is stated beside the source price; shipping, duties, extra tax on imports, wiring, labour and commissioning services are excluded. Site-specific enclosures, backboxes, connectors and circuit protection must be allowed for where listed, not treated as free. Australian fixed mains work requires a licensed electrician. These are researched examples, not hardware-tested installations.