Safety: only use the bulb ratings and fittings the maker specifies, and never take a mains-powered bulb apart or reflash one while it is in a live fitting. Treat any smart bulb as untrusted on your network and keep it on an IoT VLAN with no inbound access from the internet.
What happened
The Verge reported in August 2025 that Amazon had removed Sengled's Alexa skill after months of server outages, and that Sengled had been silent. The SengledTools README now says Sengled's original cloud backend is no longer operational. If your bulbs only worked through the Sengled app or cloud, you should plan around that. This is a good reminder to prefer local control.
Which bulbs do you have?
- Zigbee bulbs and hubs: the Verge says Zigbee, BLE Mesh and Matter models can still work without Sengled's servers, for example through a compatible Echo, Home Assistant, Hubitat or a SmartThings hub. Zigbee2MQTT supports Sengled models such as the E11-G13 and E11-N1EA. Zigbee2MQTT notes that Sengled bulbs are end devices, not routers, so they will not extend your mesh.
- Wi-Fi bulbs: the Verge says these do not work with Alexa any more. SengledTools offers a local UDP Home Assistant integration, a CLI tool that can pair bulbs to your own MQTT broker, and an optional firmware flashing path.
- Zigbee bulb: reset it and pair it to Zigbee2MQTT, ZHA or your hub. Low effort and low risk.
- Wi-Fi bulb, Home Assistant: reset it, re-provision its Wi-Fi with SengledTools' wizard, then install the sengled_udp custom integration. The project recommends starting here, as it needs no flashing or MQTT setup.
- Wi-Fi bulb, MQTT or open firmware: only if you need features the UDP route does not give you, and you accept a real chance of bricking the bulb.
- SengledTools is a community project, not from Sengled, and it may break if bulb firmware changes. Read its issues before you start.
- I have not verified how the bulbs' UDP control is secured. Assume that anything on the same network that can reach the bulb can control it, so keep them on an IoT VLAN, and let only Home Assistant talk to them.
- Flashing is documented as tested with only a couple of models, with different modules in others. Do not flash a bulb unless you are happy to lose it.
- Do not port-forward bulbs, and block them from the internet if you can.
I would choose local-first products (Zigbee, Thread or Matter) for new purchases, and avoid devices whose only control path is a vendor cloud.
Discussion: are your Sengled bulbs Zigbee or Wi-Fi, and what are you using to control them now? Has anyone had success re-pairing a whole house of bulbs?