Just Smart Homes

Step 6 - Programming the Reader Master Card
Using the Card / Tag that was supplied with the Reader, place the Reader Master Tag on top of the Programmer, and click on the [Making Card] button.
When Complete, the Programmer will beep once, and the software will display ""

Step 5 - Setting the Desfire Reader Key In order for the Desfire reader to read programmed desfire cards, the reader must be configured with the same programmed key as the Desfire card(s). Set the Corresponding Desfire Reader Key that you want to program the reader to use, in the Card Gamni field. ...

Step 4 - Ensure the Desfire Master Card Parameters are Correct

Ensure that the following parameters are correct
Catalogue ID: 10 01
File ID: 1
Gemni ID: 2

Step 1 - Open the Desfire Reader Master Card Programmer software. Reader-Software-1.PNG Reader-Software-2.PNG Step 2 - Connect the Desfire Programmer to the PC USB Port Windows will download the USB Device drivers to allow you to connect to the Device Once the drivers are installed, click on the [C...

The following Guide details how to configure a blank Chinese Desfire Card reader to work with a set of Programmed Desfire Cards. In order to program the reader, you will require the following. * A Desfire Card Programmer * A brand new Chinese Desfire Reader with blank programming card * The Chinese ...

USER REFERENCE INFORMATION How do I Arm the system? The system can be armed when the READY symbol is displayed on the LCD Display 1. Close all zones on the system. 2. Press the [ARM] button on the keypad. 3. Press the [0] to Regular Arm the system. When you have correctly armed the system, the Exit...

1.3 Users • If more than 1 user is required, then add them using the following procedure. 1) Enter the Master Code (Default [0] [0] [0] [0]) 2) Press the [PRG] Button. 3) Enter the 2 Digit User Number ([0] [0]=Master, [0] [1]=User 1, [1] [5]=User 15) 4) Enter the new 4 Digit User Code, 5) Enter the...

1.2 Programming Zones • Zone 1 is the Keypad Zone, and Zones 2, 3, 4, 5, and 6 are on the main board • When programming zones, enter the required memory location, enter the zone type, then press the [->] (right arrow button), and enable the required zone options. [21] : Memory Location for Programm...

1.1 Default Panel Programming Enter the Installer Mode by pressing [7] [7] [7] [7] when the system is disarmed • The [READY] [ARM] and [TROUBLE] LED’s should now be flashing indicating you are now in install mode. • The Panel can be defaulted by Pressing [5] [2], then by pressing [1] [2] [3] [4] [5...